Daily maintenance of stone materials often use agent crystal products,stone material maintenance with a good degree of smoothness,suitable for long-term maintenance use.However,there will often be customer feedback that light color stone with agent products after throwing yellowed,or the ground inlaid copper strip and other metals are corroded.
For these problems,today small make up on the use of agent products tips.
Conditions of Use:
General agent kind of crystalline material is used in clean and dry stone material surface effect is better,wet stone material use effect is poorer,stone material can become yellow after doing below the circumstance of stone material moisture,even creme yellow kind stone material also is such.
Of course,some special agent products can be used in humid conditions,pay attention to the use of discrimination.
Usage:
In the process of crystallization,too much and too little amount of crystallization agent will affect the effect.
1,crystallization agent put more,not easy to dry,but also produce orange peel phenomenon.
2,crystallization agent put less,before the polishing,dry,does not work.
3,how to grasp the amount of use,it is about to see the accumulation of experience.
Generally speaking,just changed the new cushion,need to put some more,the first time when throwing and grinding the ground can also put some more,as the number of times of throwing and grinding increases,as appropriate to decrease the amount of use.
Frequency of use:
Each crystallization,the surface of the stone will form a layer of crystal hard layer,do not think that this layer of crystal hard layer is the thicker the better,the fact is that each layer of crystal hard layer is the thinner the better;The more times the polishing is done,the more layers are added,and the better the effect.
However,this does not mean that the crystallization effect will be better if the crystal is tossed several times.After the formation of each crystal hard layer,there should be a health stage,which means that after the crystallization has been done once,a period of time can be used to make crystallization again.In principle,it is recommended not to crystallize stone more than twice a day.
The truth is very shallow actually,brush paint for example,it is every layer is thinner of course,paint is brushed more,the effect is better,and every time brush paint to want to assure before the paint of one time already dried ability is brushed.
After crystallization hardening,dust must be pushed on the ground.Only after pushing the dust of the ground,to carry out the next crystallization hardening construction.
Special circumstances:
The light color stone uses the agent kind product to make the crystallization,the suggestion first uses the hundred clean pad or the nano pad to cast two times,then uses the steel wire cotton to carry on the polishing,such can avoid the stone yellow changes.For example:white series granite,white marble,white jazz,white elegant white,white;White polished brick,microcrystalline stone,artificial stone,terrazzo,etc.Ground metal decoration,also suggests to use wool pad or nano pad effection,after two with steel wool polishing,in order to avoid color stone,a customer can choose stainless steel wool to crystallization,in practice,the effect of two kinds of steel wool throw difference is not big,but the cost of the stainless steel wool is higher than ordinary steel wool.
